Printing Knowledge Base
A collection of guides to help you understand and optimize print settings on the 22 IDEX V4.
Calibration & Tuning
Material Calibration TestsFirmware-based calibration for nozzle temperature, pressure advance, and flow rate
Pressure AdvanceTune pressure advance for sharp corners and clean seams
First Layer CalibrationTune first layer height for Standard, Mirror, and Duplicate Modes
Print Settings
Print SpeedsUnderstand and optimize print speeds for different materials
Volumetric Flow RateMaximum extrusion rates and how they affect quality
Line Width & Layer HeightChoose optimal line dimensions for strength and detail
Layer TimeMinimum layer time and cooling strategies for small parts
Part Design & Placement
Part PlacementOptimal part orientation and placement on the build plate
Materials & Temperatures
Supported MaterialsCompatible filament types for the 22 IDEX
Material-Specific GuidesRecommended settings for each material
YouTubeFilament DryingWhy and how to dry filament
Hardware Reference
Nozzle ReferenceNozzle types, sizes, and material compatibility
Slicer SetupInstall and configure slicing software with Vision Miner profiles
See Also
Print Defects & SolutionsVisual guide to diagnosing and fixing print quality issues